|
Bending Fatigue Strength Improvement of Carburized Gears
|
Download PDF
|
05/09/2006
|
A. M. Freborg, B. L. Ferguson, Z. Li, D. X. Schwam, and B. J. Smith
|
bending fatigue strength, carburized aerospace gears, Pyrowear 53, residual stress measurement/validation, model validation, physical characterization, bending fatigue performance, loading model, hardness profile measurement, and single tooth bending fatigue
|
carburizing, oil quench, intensive quench, deep freeze, and temper
|
|
|
Enhanced Surface Residual Compression of Carburized Steel Parts Using Laser Peening Process with Preload
|
Download PDF
|
06/09/2014
|
Zhichao (Charlie) Li and B. Lynn Ferguson
|
surface residual stress, X-ray diffraction residual stress measurement, carburized AISI 9310 steel, Johnson-Cook, four-point bending fatigue test, residual stress model validation, laser peening model, and fatigue loading model
|
gas carburization, oil quench hardening, and laser peening
|
|
|
Experiment and Simulation of Heat Treatment Results of C-Ring Test Specimen
|
Download PDF
|
01/01/2006
|
Zhichao Li, B. Lynn Ferguson, Xichen Sun, and Peter Bauerle
|
Carburized AISI 8620 steel, C-Ring test specimen, model validation, residual stress measurement, carbon profile prediction, hardness profile prediction, residual stress prediction, carbon profile measurement, hardness profile measurement, and phase transformation prediction
|
gas carburization and oil quench
|
|
|
Modeling the Effect of Carburization and Quenching on the Development of Residual Stresses and Bending Fatigue Resistance of Steel Gears
|
Download PDF
|
07/24/2012
|
Zhichao Li, Andrew M. Freborg, Bruce D. Hansen, and T.S. Srivatsan
|
bending fatigue, carburized Pyrowear 53 gear, residual stress, process modeling, single tooth bending load model, and dynamic contact stress analysis
|
vacuum (low-pressure) carburization, oil quench hardening, cryogenic treatment/deep freeze, and double temper
|
|
|
Residual Stress and Bending Fatigue Strength in Carburized and Quench Hardened Pyrowear 53 Steel Gears
|
Download PDF
|
04/18/2016
|
B. Lynn Ferguson, Andrew M. Freborg, and Zhichao Li
|
residual stress, bending fatigue strength, carburized Pyrowear 53 steel gears, bending fatigue test, residual stress measurement, model validation, and loading model
|
vacuum (low-pressure) carburization, subcritical anneal, oil quench, intensive quench, deep freeze, and double temper
|
|
|
Probe Design to Characterize Heat Transfer during Quenching Process
|
Download PDF
|
09/09/2012
|
B. Lynn Ferguson, Andrew Freborg, and Zhichao Li
|
heat transfer coefficient, heat transfer characterization, process characterization, and equipment characterization
|
water quenching
|
quench probe
|
